Creality Hyper PLA
High-speed PLA for fast CoreXY printers. Creality publishes one recommended setting per printer, not a range: 220°C nozzle, with the bed at 45°C on the K1 and 50°C on the K2 Plus.
Verified November 2026 · Creality data, linked belowPrint settings
- Nozzle temperature
- 220°C
- Bed temperature
- 45–50°C
- Density
- ≈ 1.24 g/cm³ (typical PLA; not in the maker's data)
- Length per kg (1.75 mm)
- ≈ 335 m
- Enclosure
- Not needed
- Drying
- Not found in the maker's data
- Typical price, checked November 2026
- $20 per kg
About PLA
Easiest to print, low warp, rigid. Softens around 55–60°C, so it is a poor choice for hot cars or outdoor sun.
Getting good results with Creality Hyper PLA
- Start at the maker's setting (220°C) and print a temperature tower to find your printer's sweet spot.
- Faster printing needs a hotter nozzle; slow, detailed prints often look best a little cooler.
- No enclosure needed; keep part cooling on after the first few layers.
- Dry it, following the label on your spool, if you hear popping, see extra stringing, or the surface turns rough.
Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.
Sources
The temperatures, density and drying setting were checked against the maker's own published data in November 2026; the notes and tips are our own summary. The price is what the maker charged in its US store that month; prices change often. Values we could not find in the maker's data are marked as such.
Common PLA print problems
Fix guides for the problems PLA runs into most often.