Materials
Creality Hyper ABS
High-speed ABS. Creality publishes one recommended setting (for its enclosed K2 Plus, chamber at 50°C), not a range.
Verified November 2026 · Creality data, linked belowPrint settings
- Nozzle temperature
- 260°C
- Bed temperature
- 80°C
- Density
- ≈ 1.04 g/cm³ (typical ABS; not in the maker's data)
- Length per kg (1.75 mm)
- ≈ 400 m
- Enclosure
- Recommended
- Drying
- Not found in the maker's data
About ABS
Heat resistant and machinable but warps; needs an enclosure and ventilation.
Getting good results with Creality Hyper ABS
- Start at the maker's setting (260°C) and print a temperature tower to find your printer's sweet spot.
- Faster printing needs a hotter nozzle; slow, detailed prints often look best a little cooler.
- Use an enclosure and keep drafts away to prevent warping and layer splits.
- Dry it, following the label on your spool, if you hear popping, see extra stringing, or the surface turns rough.
Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.
Sources
The temperatures, density and drying setting were checked against the maker's own published data in November 2026; the notes and tips are our own summary. Values we could not find in the maker's data are marked as such.
Common ABS print problems
Fix guides for the problems ABS runs into most often.