Materials
eSUN ABS+
Improved-toughness ABS; the maker recommends printing in an enclosed chamber.
Verified November 2026 · eSUN data, linked belowPrint settings
- Nozzle temperature
- 230–270°C
- Bed temperature
- 95–110°C
- Density
- 1.06 g/cm³
- Length per kg (1.75 mm)
- ≈ 392 m
- Enclosure
- Recommended
- Drying
- Not found in the maker's data
- Typical price, checked November 2026
- $16 per kg
About ABS
Heat resistant and machinable but warps; needs an enclosure and ventilation.
Getting good results with eSUN ABS+
- Start near the middle of the range (250°C) and print a temperature tower to find your printer's sweet spot.
- Faster printing needs a hotter nozzle; slow, detailed prints look best near the low end of the range.
- Use an enclosure and keep drafts away to prevent warping and layer splits.
- Dry it, following the label on your spool, if you hear popping, see extra stringing, or the surface turns rough.
Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.
Sources
The temperatures, density and drying setting were checked against the maker's own published data in November 2026; the notes and tips are our own summary. The price is what the maker charged in its US store that month; prices change often. Values we could not find in the maker's data are marked as such.
Common ABS print problems
Fix guides for the problems ABS runs into most often.